Tag Archive for concrete driveways in Melbourne

Why Choose Asphalt Instead of Concrete

1914909

 

Today, I’m going to talk about why you should choose asphalt instead of concrete. These are the two most common driveway materials that you will be using to install or replace a new driveway. As with any driveway, both needs to be properly maintained to maximize the lifespan of the work, so what I’m going to do is break down the differences between the two. If you’re looking to replace or install a new driveway, the following are the reasons why you should choose asphalt instead of concrete.

Cost

First off is the cost of the two. In general, concrete is always more expensive to install. You will probably end up paying about forty to sixty percent more for a concrete driveway than you would for an asphalt one. Concrete driveways are usually smaller and shorter so they don’t end up being too expensive. However, asphalt driveways are usually a lot longer and bigger driveways and asphalt usually is the best option to use to save on costs now.

Installation

Asphalt driveways are fast to install. You can have your driveway installed in about two days and it’ll be ready to be driven on in about another day after that, so in other words, you can have a paving contractor out on your property on Monday and you could be driving on your new Asphalt driveway by Wednesday or Thursday. As for concrete, it just takes a bit longer. A concrete driveway can take up to four to five days to install there’s a lot more work with concrete. They must build forms for it and add all the other things that goes along with it. Then, after its installed, it will take about another week for you to be able to drive on it. It just takes concrete a lot longer to set. Learn more.

Durability

Concrete doesn’t hold up as well as an asphalt driveway does, concrete is very hard and when it freezes it simply breaks. Whereas asphalt is flexible and it moves with the earth when we hit the wintertime. So as the ground goes through the free fall cycle. The asphalt will actually move with the ground. It can still crack, but not near as extremely as concrete.

Maintenance

Well, how about the maintenance between concrete and asphalt? This is generally where most homeowners have a failed common myth that concrete has no maintenance and asphalt is all maintenance. Well, it’s not exactly the truth, to be honest, concrete needs to be sealed every year to two years and that’s very important, because it’ll prevent staining and things like salt damaging it as easily. For asphalt on the other hand, it is only be sealed every three to five years when done properly. Every fall, you do need to come out and fill all the cracks which if you stay on top of it, is not that big of a deal. Rock salt can be pretty corrosive when we use it in the wintertime but it doesn’t affect asphalt in any way. However, concrete salt is very damaging as the very top layer of sand start to peel off the concrete driveway.

For a lot of homeowners, making a decision between concrete and asphalt isn’t always made with all the facts. Take your time and remember the choice is yours to be made. We simply wants you to have all the facts before making a final decision whether to choose asphalt or concrete for your driveway. Learn more details at: http://www.designerpremix.com.au/articles/maintaining-your-exposed-aggregate-concrete-driveway/

Solid vs. Aggregate Driveway

Entrance to a beautiful Palm Springs home

There are different options of concrete driveways in Melbourne, and it can be hard to choose the right one. Two of the most popular driveways is the solid driveway and the aggregate driveway. The problem is that people don’t really know the difference between these driveways and therefore they don’t really know which one to purchase. With all these information, it will be easier to know the difference and to make sure that you know which one will be best for your driveway.

What is the solid concrete driveway

Solid concrete driveways are just another, abetter word for the normal concrete that you can purchase for your driveway. It is smooth and there aren’t any visible stones. This is the cheaper type of concrete, but this is also the better option when it comes to decorative concrete. It’s because you can color this concrete any color you want. It doesn’t need to be the normal gray color that everyone hates so much.

People are choosing this option because of the price of this driveway. It is the cheaper option and many people can afford this one instead of the aggregate driveway. Learn more.

The aggregate driveway

The aggregate driveway isn’t smooth at all. The stones of the concrete mixture are visible and can create a rough surface. The benefit if this type of driveway is that this is durable and long-lasting. However, people don’t really consider this as decorative concrete. However, it depends on the type of aggregate driveway that you are considering.

There are a variety of people that prefers this one, instead of the normal solid driveway, because of the rough finish that this driveway has. Making it harder to crack the concrete as so many people know.

Which one is better?

Now, you might be asking which one is the better option when it comes to creating a high-quality concrete driveway in Melbourne. The problem is that what might be best for one person isn’t going to be the best for another person.

There are a variety of things that you should consider. Are you willing to pay more for a higher quality concrete floor or are you looking for the cheapest possible option? If you are looking for a durable concrete driveway, then the aggregate driveway is best. If you are looking for a colorful concrete driveway or looking for something cheaper, then the solid concrete floor might be your best option. You need to consider what you want, and which one is going to be best for your driveway and personal needs.

Which one is best: solid concrete driveways or the aggregate concrete driveway? This is the number one question that many are asking about concrete driveways. Before you can choose the one that is going to be best for you, you need to know what the difference is between these two driveways. And, you need to make sure that you can afford it. Then, you will know that when it comes to your concrete driveway in Melbourne, that you are going to have the right one for you and your budget. To find out more, check out http://designerpremix.com.au/

 

The Designer’s Choice – Concrete Driveways in Australia

cobblestone concrete driveway

When it comes to concrete driveways in Melbourne, there’s little wonder that decorative concrete styles like exposed aggregate and polished concrete are becoming so popular. These versatile, hardwearing and attractive options offer a timeless look to any property combined with a durable surface that lasts well.

Concrete is a relatively novel choice for driveways, but one that can make an attractive choice for both house and budget. No matter what your taste, there’s a style of concrete driveway that will suit you, too, ranging from polished to imprinted and even a pre-eroded look exposing decorative aggregate. Below, we look at a few more advantages of this choice.

• Fast maintenance.
• A luxurious look for less than luxurious money.
• Simple installation.
• Long lasting and durable.

Fast maintenance.

Who wants a concrete driveway they’re forever fiddling with? Weeds and plants force through gaps in paving very easily, and leave your drive blotched with unsightly overgrowth. Almost every type of traditional paver will have issues with weeds. Decorative concrete is perfect for avoiding this tedious chore, as it leaves no way for weeds to ooze under the components.view source http://www.insidehalton.com/shopping-story/5295590-concrete-driveways-are-the-solution-to-cracked-asphalt/

A luxurious look for less than luxurious money.

Budget can be a constraint in any situation. However, no one wants a house or business with unsightly decoration. Decorative concrete driveways are kind on the pocket whilst still giving a great look and feel to the project. Whether you opt for polished concrete or the popular exposed aggregate look, a concrete driveway in Melbourne will add dollars to your property value whilst still leaving dollars in your pocket.

Simple installation.

Concrete driveways in Melbourne are easy to install. They also don’t require extensive disruption to your routine while they’re under construction. You want quality work, but it’s always nice if it can be done without having to have workmen in your life for an eternity! Decorative concrete driveways will take less time to lay then a traditional paving or brick driveway and require slightly less site preparation, so you won’t be inconvenience more than need be. The ground preparation ensures that the driveway is laid both smoothly and to be stable and rooted in the surrounding earth.

Long lasting and durable.

Paving stones and bricks will both be affected by the ground underneath them. They may sink or be forced up by roots, and earth disturbances will leave your driveway an unsightly mess. Decorative concrete uses the best cement and reinforced concrete to ensure that you get a super-strong, durable surface that’s laid as a single cohesive whole and won’t be prone to sinking or being pushed through.

cobblestone concrete driveway

Whatever your taste, decorative concrete will help you put the finishing sparkle on your premises. There’s no wonder that concrete driveways are becoming one of Australia’s big design selling points and the choice of designers across the continent. Why not join the trendsetters and lay yourself a polished concrete or exposed aggregate concrete driveway in the Melbourne area- you won’t be sorry!

4 Frequently Asked Questions About Decorative Concrete Driveways in Australia

Decorative Concrete Driveways in Australia

Whether you’re considering polished concrete or the increasingly popular exposed aggregate, decorative concrete driveways are becoming more and more popular worldwide. If you’re considering installing a concrete driveway in Melbourne, here are some of the most common questions people ask.

Do concrete driveways need to be sealed?

Decorative concrete driveways do need to be sealed, if they’re exposed to freezing temperatures or high humidity at any point in the year. A good quality sealer will stop the polished concrete or exposed aggregate from absorbing water, and also repel grease and oil stains as well as reduce chemical damage. If the cement if coloured, it will also serve to enhance the look of the colour.

Remember that there are 2 basic categories of sealer. A penetrating sealer will offer better protection, although film forming sealants have their place. Make sure you use it exactly according to the manufacturer’s instructions.view full here!

Can my concrete driveway crack?

A properly jointed concrete driveway in Melbourne is unlikely to crack. The presence of the joints allows expansion in the cement, reducing the likelihood of cracking. Of course, no matter how good the job you may find a crack developing. Mostly these will not affect your driveway’s integrity, but they can be visually unappealing on polished concrete. Discuss the issue with the contractor that you choose, and find out how they will handle the situation and whether they will fix cracks.

What about colour that doesn’t come out like I wanted?

Realise that no contractor can promise an exact shade that will perfectly match the showroom sample. Decorative concrete will display slight variations in colour, especially larger jobs that use more loads. It may be impossible to accurately match existing concrete or cement that’s been laid down for a while, due to simple dye variation. Even plain cement may show some variation. Just be assured that these re minor variation and time will fade them away.

Will I get a warranty on a concrete driveway in Melbourne?

You should! A good contractor will warranty their work, and you may even be able to purchase an extended warranty too. These are usually available through concrete associations in your area. These can be great places to start looking for your contractor, too. If there’s a decorative concrete driveway in your area which you admire, you may want to ask the neighbor who they used for the job and what kind of warranty they got for it.

Decorative Concrete Driveways in Australia

Remember that recommendations can be a great way to find a reputable contractor. Be sure to ask the contractor for references, and even perhaps a list of projects in your area they’ve worked on. Make sure they carry adequate insurance, and that they’ve been around a while.see site http://www.stuff.co.nz/waikato-times/business/66776587/Ghost-town-Project-now-a-house-boneyard

Whether you fancy exposed aggregate or a polished concrete driveway in the Melbourne area, these handsome and timeless looks will make your property stand out for the right reasons.

3 Secrets To a Timeless Look: Exposed Aggregate Concrete in Australia

Aggregate Concrete

There’s a ton of wonderful methods of laying concrete driveways in Melbourne. There’s certainly nothing wrong with the glamorous looks of finely polished concrete, or stamped concrete which gives you all the benefits of prick or paving with none of the downsides. However, if you particularly want a classic, timeless look that can integrate with any architecture, be sure to add exposed aggregate concrete to your to-do list.

More about exposed aggregate as a look

This is the choice of designers through Australia. It’s a stylish go-to treatment to add a touch of grace to any set up, be it home or business. It’s never gone out of style, and remains both trendy and current. It’s also very durable. In fact, most other decorative concrete looks will wear down over time to an exposed aggregate- but without the deign flair of making it your primary choice. In fact, an exposed aggregate driveway won’t ‘spall’ like other forms of concrete, as the top layer of cement paste is already removed in an even and decorative manner. It’s a hardwearing surface that provides good traction for vehicles and people, is durable and will last and last.

Isn’t exposed aggregate dull?

Exposed aggregate driveways are formed by purposely removing the top layer of cement to reveal the aggregate encased within. There’s a ton of aggregate shapes and looks you can choose, and if you think they’re limited then you don’t have a good designer! Why not consider using an aggregate which incorporates a luminous stone or polished glass to give the ultimate in shimmering shine? Or you can choose to combine a print and exposed aggregate look for extra personalisation.

Design tricks to make exposed aggregate stylish and chic.

There’s a ton of designer tricks you can use to ensure your exposed aggregate concrete driveway in Melbourne is the envy of your neighbours. A common design trick is to embed the lighting- be it fibre optic, conventional or solar- along the drive edges, providing both illumination and the tip-top of style. You can also choose to stain the driveway to suit your tastes.continue reading..

If you don’t want a full exposed aggregate look, don’t despair.

You don’t have to commit fully to aggregate if you’re not sure it will suit your area. You can get clever and border a standard polished concrete drive with exposed aggregate accents, or flip the look and border your exposed aggregate driveway with printed or polished concrete to offset the look.

Maintain your driveway regularly to keep the classy appearance.

Aggregate Concrete

Remember to seal your exposed aggregate concrete driveway on a regular basis- usually every two years- for maximum wear. Not only will this keep it well preserved and in top condition, it will also dramatically enhance the look of the driveway.read more from http://sourceable.net/concrete-durability-key-sustainable-building/

Exposed aggregate concrete driveways are the top choice of designers looking for a classic, timeless take on the ever-popular and easy to maintain concrete driveway in Melbourne and surrounding areas.